[email protected] 18826897469

10JNEX900 10JNHF600 20JNEH1200 JFE川崎硅钢 超级铁芯 JFE Super Core

更多技术参数、现货规格、铁芯定制,请联系客服。

Super Core 超级铁芯 

Super Core is manufactured using an innovative process that is completely different from that for conventional silicon steel sheets. These are the highest grade, non-oriented magnetic steel sheets available.
Conventional silicon steel sheets have a Si (silicon) content of 3.5% or less. It has long been known that the magnetic characteristics of a silicon steel sheet improve as the Si content increases, peaking at 6.5%.
However, it has been impractical to produce thin steel sheets with a Si content of over 3.5% because the steel tends to harden and become brittle. In 1993 JFE Steel solved this production problem through the adoption of a process called the CVD process, and successfully introduced the first 6.5% Si steel sheets (JNEX-Core) to the world. In order to meet new demands, this technology has continued to be developed, leading to the commercial production of gradient high-silicon steel sheets with superior high-frequency characteristics (JNHF-Core).
以往的硅钢片最多添加3.5%的Si(硅)。众所周知,若增加硅含量,其磁性能会得到相应提高,当Si的添加量达到6.5%时,磁性最高。但Si含量超过3.5%时,会使钢变硬变脆,从而无法轧制成薄钢板。
1993年,JFE钢铁采用CVD工艺法,解决了这个制造难题。 6.5%的硅钢片(JNEX铁芯)的工业化也首次在世界上取得了成功。 此外,为了满足新的需求,进一步发展此技术,高频率特性的卓越梯度高硅钢片(JNHF铁芯)也实现了商业化批量生产。

JNEX-Core /10JNEX900

JNEX-Core is the highest-grade non-oriented magnetic steel sheets manufactured with a production method (CVD process) that is completely different from that for conventional silicon steel sheets, allowing a previously impossible Si content of 6.5%
与以往的硅钢片相比,JNEX铁芯采用了完全不同的制造方法(CVD法)从而实现了以往不可能的6.5%Si含量。
最高端的无取向硅钢片。

Low Core Loss
低铁损
Core loss in high-frequency ranges is extremely low. This allows for low heat generation and size reductions for magnetic components such as high-frequency reactors and transformers.
在高频率领域中铁损非常低。
充分发挥此特点,可实现高频电抗器、高频变压器等机器的低发热和小型化。
Low Magnetostriction
低磁致伸缩
Magnetostriction which causes noise and vibration is nearly zero. This enables significant noise reductions for magnetic components such as reactors and transformers.
磁致伸缩引起的噪音、振动几乎为零。
充分发挥此特点,可大幅度降低电抗器、变压器等机器的噪音。
High Permeability
高导磁率
The permeability is extremely high across a wide range of frequencies, making it highly suitable for use in shield applications and CT.
从低频到高频,导磁率非常高。
充分发挥此特点,可用于屏蔽用途或电流转换器等。
Stable Quality
质量稳定
The high-temperature processing provides thermal stability. Since there is minimal deterioration of the properties due to machining, so stress-relieving anneals are not required.
由于作了高温处理,所以具备热稳定性。
且加工导致的特性劣化程度低,
所以不需要做消除应力退火处理。
Non-oriented
无取向性
There is virtually no difference in the characteristics between the rolling direction (Ldirection) and the transverse (C-direction). Therefore, this can be used in a wide range of applications, from stationary machines to rolling machines.
产品的轧制方向(L方向)和宽度方向(C方向)的特性几乎没有差别。
因此,可广泛应用于从静止器到旋转机等各种领域。

10JNEX900 10JNHF600 20JNEH1200 JFE川崎硅钢 超级铁芯 JFE Super Core

10JNEX900 10JNHF600 20JNEH1200 JFE川崎硅钢 超级铁芯 JFE Super Core

10JNEX900 10JNHF600 20JNEH1200 JFE川崎硅钢 超级铁芯 JFE Super Core

10JNEX900 10JNHF600 20JNEH1200 JFE川崎硅钢 超级铁芯 JFE Super Core

10JNEX900铁损曲线 High-Frequency Core Loss Curves (EXCEL数据)

10JNEX900 10JNHF600 20JNEH1200 JFE川崎硅钢 超级铁芯 JFE Super Core

10JNEX900磁化曲线 High-Frequency Magnetization Curves (EXCEL数据)

10JNEX900 10JNHF600 20JNEH1200 JFE川崎硅钢 超级铁芯 JFE Super Core

JNHF-Core /10JNHF600

For the JNHF-Core, the siliconization technology (CVD process) used for JNEX-Core has been further developed, leading to even greater lower core loss in the high-frequency ranges.
JNHF铁芯是在JNEX铁芯的渗硅技术(CVD法)基础上发展改进的产品,可实现高频领域的更低铁损化。

Low Core Loss
低铁损
For high-frequencies in excess of 5 kHz, out shines even JNEX-Core for low core loss.
在5kHz以上的高频应用中,其铁损低,超过了JNEX铁芯。
Highly Workable
高加工性
Excellent workability for pressing, bending, stamping, etc.
拥有优异的冲压性、弯曲加工性、铆接性等加工性能。
Non-oriented
无取向性
There is virtually no difference in the characteristics between the rolling direction (L-direction) and the transverse direction (C direction).
Therefore, this can be used in a wide range of applications, from stationary machines to rolling machines.
产品的轧制方向(L方向)和宽度方向(C方向)上的特性几乎无差别。
因此,可广泛应用于从静止器到旋转机的各种领域。
High-saturation magnetic flux density
高饱和磁通密度
Has a high saturation magnetic flux density of 1.85 ~ 1.94 T Using this material in a reactor takes full advantage of the superior DC superimposition characteristics.
拥有1.85~1.94T高饱和磁通密度。
如用在电抗器上,可显示出优异的直流重叠特性。

10JNEX900 10JNHF600 20JNEH1200 JFE川崎硅钢 超级铁芯 JFE Super Core

10JNEX900 10JNHF600 20JNEH1200 JFE川崎硅钢 超级铁芯 JFE Super Core

10JNEX900 10JNHF600 20JNEH1200 JFE川崎硅钢 超级铁芯 JFE Super Core

10JNHF600磁化曲线 High-Frequency Magnetization Curves (EXCEL数据)

10JNEX900 10JNHF600 20JNEH1200 JFE川崎硅钢 超级铁芯 JFE Super Core


更多技术参数、现货规格、铁芯定制,请联系客服。

日本JFE川崎硅钢材料,现货有很多牌号,
比如:10JNEX900/10JNHF600/15JNSF950/20JNEH1200/20JNEH1500,等等,可以分条分片交货。
更多硅钢视频和图片,请咨询客服,谢谢。
欢迎来电索取样品试用。